+86-186-5398-3153
Toggle Plate 418517 - ZG270-500 Suitable Models: C63
Metso · Jaw Crusher Wear Parts & Spare Parts Partner ISO 9001 Factories · Direct Sourcing

Toggle Plate

OEM Part Numbers Compatible: 418517

Toggle Plate for Metso C63 jaw crusher, OEM No. 418517. Standard-duty design matched to OEM specifications. Made of ZG270-500 with hardness HB 170-230. Weight: 22 kg. Dimensions: 193×44×14 mm. Suitable for crushing limestone, coal and gypsum under standard feed conditions.

Material Grade
ZG270-500
Weight
22 kg
Hardness
HB 170-230
Dimensions
193×44×14 mm
Certification
ISO 9001:2015; wear parts comply with GB/T 5680 high-manganese steel castings standard
Lead Time
30 days
Warranty
12 months from date of shipment; normal wear of wear parts excluded

Suitable Model

C63
Request Quote WhatsApp

Watch Product Demo

See the production process and real machine installations.

Watch on YouTube

Visit our YouTube channel for full production footage, material testing, and customer installation cases.

Application

Core wear-resistant parts that directly participate in ore crushing inside the crushing chamber, operating under high impact and high abrasive wear conditions and directly affecting crushing efficiency and product size.

Installation Notes

1. Before installation, check the tooth profile of jaw plates/cheek plates and mounting surfaces for casting defects and deformation; 2. Ensure the jaw plates fit tightly against the jaw body without gaps, tightening bolts diagonally in sequence to the specified torque; 3. Run a 30-minute no-load test, check for abnormal noise and vibration, and confirm uniform tooth gaps before feeding material.

FAQ

What is the typical service life of jaw plates (toothed plates)?
Under normal feed size and material hardness, the service life of Mn13Cr2 high-manganese steel jaw plates is typically 3-6 months, depending on material hardness, feed size, throughput and tooth profile design. Turning the plates over periodically can extend life by about 20%.
How to handle uneven wear of jaw plates?
When the jaw plate teeth show uneven wear or severe local wear, stop the machine and check whether the feed size is uniform and whether material is fed to the center of the crushing chamber. If wear exceeds half but has not reached the scrap limit, swap the fixed and moving jaw plates or turn them over.
Why do jaw plate bolts loosen and fracture easily?
Main causes include bolts not tightened diagonally in sequence to the specified torque during installation, gaps between the jaw plate and jaw body, and impact overload from oversized feed material. Regularly re-tighten bolts, check mating surfaces, and prefer high-strength bolts of grade 8.8 or above when replacing.

More Parts in This Category

Bearing Housing

Bearing Housing

285449
Bearing Housing

Bearing Housing

285450
Wedge Pair

Wedge Pair

312012
Flange

Flange

312316
Hook C-Series Key

Hook C-Series Key

341012
Pipe

Pipe

418821

Inquiry Form

Fill out the form below and our team will respond within 24 hours with a competitive quote.

Toggle Plate · 418517 · C63
Request Quote WhatsApp